TRAUBTNL 12
Highly precise sliding headstock technology
from the building block system
 
     
  • High production rates due to simultaneous machining with up to four tool carriers at two identical spindles; 0.3 sec chip-to-chip time
     
  • Two tool carriers with X- and Z-axis and six stations each for driven tools
     
  • Front and rear working each have one tool carrier, which have four stations per carrier
     
  • Minimal tool interference because of the patented arrangement of four tool carriers in two intersecting planes
     
  • Universal tooling, short setup times using the comprehensive tooling system, the patented tool mounting and preset tool holders
     
  • Good accessibility in spite of the compact architecture; exterior dimensions are independent of equipment options

 
Specifications
  Work spindle  
  Bar capacity (main / counterspindle) mm 12.7 / 12.7  
  Turning length max. mm 140  
  Power at100% kW 2.5  
  Rapid traverse Z1 m/min 30  
  Speed max. rpm 12000  
  C-axis (main / counter spindle)   Optional  
  Tool carrier / stations   4 / 20  
  Slide travel Y1 mm 38 (-10 + 28)  
  C-axis (main / counter spindle)   Optional  
  Drives for rotating tools   Optional  
  End working attachment   Optional  
  Backworking attachment   Optional  
  Turret 2 with Z-axis (1.968 in.)   Optional  
  CNC control   TX 8i  
  Dimensions      
  L x W x H (with bar loader) mm 1450 (6430) x 950 x 1480  

Subject to change without notice.