C30
Design features
  • Modified gantry design, systematically avoiding the disadvantages of the conventional gantry design.
  • Tool travel in 3 axes, thus work piece-independent dynamics, ideal condition for rapid traverses and feed rates of up to 60 m/min
  • Modular configuration of table and optional variants in the multi-functional machine bed.
  • Y-slide rests as a traverse on 3 carriages equipped with 3 staggered guide ways
  • Excellent guide way ratios of the traverse due to three point support and central drive.
  • Digital AC servo drives with pretensioned ball screws
  • Automatic tool change with the pick-up procedure
Modular design for any type of application
  • Multi-modular table variants
  • A wide range of work piece holding fixtures in multiple table variants including SK 50, HSK 100, T grooves, zero-point clamping systems, palletising and supply for a wide range of media.
  • Automation with pallet changer or production of a complete manufacturing cell (incl. pallet transport and pallet magazining) in 2 systems
  • Magazine extensions
  • Dry or wet machining (TSC packages including turbo filter, paper ribbon filter or sieve basket) and minimum quantity lubrication
  • Graphite machining package
  • Greatest possible degree of freedom in the machining area
  • All service and maintenance devices (Fluidbox) on the machine rear side are directly visible and accessible
  • Installation in series is possible
  • An ergonomic control panel, which can be swivelled from the operating position to the tool loading position
  
 
Machining Centres C 30 / C 40 models
Technical data    
  C 30 V C 40 V
Traverse X 650 mm 850 mm
Traverse Y 600 mm 700 mm
Traverse Z 500 mm 500 mm
     
Speed / main power    
at 20% c.d.f. 10,000 rpm/32 kW 10,000 rpm/32 kW
at 40% c.d.f. 18,000 rpm/15 kW 18,000 rpm/15 kW
at 40% c.d.f. 28,000 rpm/23 kW 28,000 rpm/23 kW
at 40% c.d.f. 40,000 rpm/26 kW 40,000 rpm/26 kW
Linear rapid traverses 45 m/min 45 m/min
Linear rapid traverses (dynamic version) 60 m/min 60 m/min
Control unit iTNC530 / S840D iTNC530 / S840D
Rigid clamping table 900 x 650 mm 1070 x 700 mm
Max. table load 1500 kg 2,000 kg
 
Technical data  
  C 30 U
Traverse X 650 mm
Traverse Y 600 mm
Traverse Z 500 mm
   
Speed / main power  
at 20% c.d.f. 10,000 rpm/32 kW
at 40% c.d.f. 18,000 rpm/15 kW
at 40% c.d.f. 28,000 rpm/23 kW
at 40% c.d.f. 40,000 rpm/26 kW
Linear rapid traverses 45 m/min
Linear rapid traverses (dynamic version) 60 m/min
Control unit iTNC530 / S840D
   
NC swivelling rotary table  
Clamping area Ø 280 mm
Swivelling range +/- 115°
Speed A-axis / A-axis (Dynamic) 25 / 55 rpm
Speed C-axis 40 rpm
Table load 300 kg
   
Clamping area Ø 630 mm
Swivelling range +30° / -115°
Speed A-/ C-axes 25 / 65 rpm
Max. table load 800 kg
   
NC rotating clamping device  
NC clamping yoke  

Subject to change without notice.